Jump to content

Welcome to GTINI

Welcome to GTINI, like most online communities you must register to view or post in our community, but don't worry this is a simple free process that requires minimal information for you to signup. Be apart of GTINI by signing in or creating an account.

  • Start new topics and reply to others
  • Subscribe to topics and forums to get email updates
  • Get your own profile page and make new friends
  • Send personal messages to other members.

Sign in to follow this  
Veedubboy

Mk3 Service Guide Tip

Recommended Posts

IN00 means you don't need a service

OEL= oil service

IN01= inspection service

IN02=major service

OEL= oil service

Switch ignition on Press and hold left hand button on speedo display Switch ign off Release button The letters "OEL" will appear on the speedo display Press clock minute button (lower one) until "-----" is shown Switch ign on and "IN00" should show IN01= inspection service Ignition on Press and hold left hand button on speedo display Switch ignition off Release button Press and release button IN01 will show in the display Press clock minute button (lower one) until "-----" is shown Press left hand button to show "OEL" Press right hand button to show "-----" Switch ignition on and "IN00" should show IN02=Major service Ignition on Press and hold left hand button on dash Switch ignition off Release button Press and release button IN02 will show in the display Press clock minute button (lower one) until "-----" is shown Press left hand button to show "IN01" Press right hand button to show "-----" Repeat to reset "OEL" Switch ignition on and "IN00" should show PROGRAMMING THE SETTINGS OF THE VARIOUS SERVICE COUNTERS. It is possible to program the current settings you want for the counters. This used if the speedo display is replaced or if you want to set your intervals to a shorter value than the factory.

For example, you can set the computer to display OEL after only 3000 miles. 1. Turn on the ignition 2. Depress the trip-reset button on the speedo display Also depress the button to set the MINUTES of the digital clock (lower one). 3. The LCD display should read "OEL 1,S", where the S indicates SET. 4. Using the trip-reset button, you can call up the following counter banks for the service intervals in sequence: OEL 1,S - distance counter for oil change (ie 7500 miles normally) OEL 2,S - time counter for oil change (ie 12 months) IN 01,S - time counter for yearly service interval (ie 12 months) IN 02,S - distance counter for special service (ie 15,000 miles ) 5. Using the button for setting the MINUTES on the digital clock (lower one), you can display the value of the counter. Repeated pressing of the button will select a subsequent lower value of the counter and at the lowest level, it will reset to the highest level and begin to decrease again. The step sizes are blocks of miles (500 miles, I think) and months (the time setting for the yearly service is a bit strange as I think it can be set to 1,2,3,4,5 or 6(Maybe it counts in 2 month blocks? Does anyone know?). 6. Once you have set each counter to the value you want, turn off the ignition. 7. Work is done.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×